IPX8 waterproof to depths of 45m
Protect GO 2 on all your water-based adventures
How to Use
1. Open the Case
Push the lock bolt @ in the direction shown in the figure. After unlocking, remove the hook ?
2. Attach the Anti-Fog Inserts
Attach the anti-fog inserts into the buckle on the back side of the Dive Case door, as shown
a) Attach the anti-fog inserts into the buckle on the back side of the Dive Case door.
b) When using third-party anti-fog inserts, ensure that the size is within 20x20x0.5mm. If the
inserts are too large, they may cause water leakage and potentially damage the camera
3. Insert the Camera
a) When inserting the camera, take care not to scratch the lens.
4. Close the Case
To close the Dive Case, latch the buckle onto the case’s hook and firmly push down until it
a) Always ensure the Dive Case is firmly closed before use. Check that the parts of the Dive
Case in contact with its rubber seal are free of dirt or dust.
b) For best results, keep the Dive Case clean, particularly the area protecting GO 2’s lens.
Only logged in customers who have purchased this product may leave a review.